Mirror side LED

So, this project got stuck and I was feeling disturbed that I didn't finish it up. Long time ago. Then a guy sent me a link to Shapeways that 3D-print objects on demand. I've been ignoring the 3D-printing as the tolerances have been too bad and the end result very coarse. But Shapeways are using laser sintering for printing, which means that an object is sliced into very thin layers and each layer is then laser hardened into the previous. The tolerances are close to 0.1 mm. Of course it is not as good as injection moulding, it is good enough though. Actually I am now 3D-printing threads directly into the object. And as I see it; better that people can get the mirror end cap in one way than not at all.

So, the idea is to reproduce the Vanagon Multivan mirror end cap in a transparent plastic. With a transparent end cap it can be filled up with electronics, for example LED's that are connected to the blinker relay. The Vanagon side visibility is terrible and the position and blinker lights are low. This is an improvement for road safety. I've also made them in solid plastic for people who needs a replacement or want to paint their van in a new colour without electronics.
Both options are heat resistant to 80°C / 176°F.

First batch of test prints are coming this way. As soon as I have tested them, just order a pair yourself!

You can find them at the Shapeways page here.